Search
 
Search by year
Search by keyword
Search by sector
Search by category
Find 
Sacmi RSS Feed
Find out how to subscribe to Sacmi RSS feeds
 
2/27/2012
Negri Bossi and Sacmi at Npe in Orlando to present their latest range of products

From the revolutionary EOS to the innovative CHS vision system used to eliminate closure defects.

Npe, the most important exhibition in the world for the plastics industry, will take place from April 1 to 5 at the Orange County Convention Center in Orlando, Florida. This occasion is not to be missed by the Sacmi Group, with its several decades of experience in the sector and important innovations that will be on show at West Hall Level II, booth 925.

Of all these innovations, Negri Bossi’s EOS, an absolute novelty offered in a wide range from 50 to 120 tons, allows the lubrication system in the mold area to be eliminated thanks to its innovative 2-platen clamping system that is also responsible for its compact dimensions. The model displayed at Npe will be equipped with a mold for producing medical items (butterfly I.V. catheters). From the EOS jewel one passes to the consolidated hybrid JANUS series, another top of the line product on display at the exhibition, which is integrated to the lateral Sytrama IML robot, which uses an “in mold labelling” article application and is produced by Sytrama, a recent Negri Bossi acquisition.

Awaited products at the exhibition are also the CANBIO hydraulic press, and the  VESTA, presented with a 48-cavity mold for syringe production.

Switching over from Negri Bossi to Sacmi, this company is presenting the acclaimed CCM48SB, characterized by excellent production performance, producing up to 1,600 caps per minute thanks to significantly reduced cycle times, and extremely reduced energy consumption. The high cavity output makes this device the ideal solution for light single-piece cap production for water (molding diameters up to 33 mm), as well as making it a versatile solution for single and double piece caps for CSD (Carbonated Soft Drinks).

Integrated on the CCM exit belt, will be the CVS 052 (CVS 3000) vision system produced by Sacmi for real time control of the caps.
Sacmi continues to invest in vision systems with the CHS 003 “stand-alone” system that controls plastic and aluminum screw caps. There are several highly sophisticated systems that can be integrated into the basic version of this CHS. For example, the 4-camera version, the CVS 360, provides total control of lateral wall cap development, including the search for any burrs on the cap jumpers with injection-molded safety bands. 

From the advantages of continuous compression moulding, then, to those provided for other stages of production in the beverage industry. Sacmi, in fact, is the only market leader in the industry able to provide two alternative technologies for preform production: compression and injection.
For example, there are the new rotary SBF blow formers; having from 6 to 24 blowing stations, these machines ensure hourly output rates of over 64,000 standard half-litre bottles.
One key advantage with these blowers is that each machine in the range can be equipped with a 1-cavity mould for a large bottle (up to 3 litres) or a 2-cavity mould for smaller bottles (up to 0.6 litres).


Press release
Back

Events News

 
9/19/2018
Euro PM2018 Congress and Exhibition
SACMI flies to Bilbao, Spain, from 14th to 18th October 2018  >>

9/17/2018
SACMI at Tecnargilla 2018, the state-of-the-art of Ceramic Factory 4.0
From the PCR 3000 super-compactor to integrated-automation presses, automated sanitaryware handling systems and 4.0-oriented plant and warehouse re-engineering  >>

9/17/2018
“Go Fast, Go Future”. 12th SACMI Sanitaryware Meeting to be held on 24 September
Featuring live demonstrations, this event will preview some of the key technological developments on show at Tecnargilla. This year, the focus will be on the new pilot plant and new developments in the modelling department.  >>

9/13/2018
Pack Expo 2018, SACMI Beverage flies to Chicago
North America’s biggest fair to showcase LINEAR filler for Bag-In-Box lines alongside labelled bottle and container inspection systems  >>

 

This website uses "cookies". If you choose to continue using the website, you are authorising the use of cookies according to our cookie policy. For further information or to deny the use of some cookies, please click here.

accept cookie policy