Search
 
Search by year
Search by keyword
Search by sector
Search by category
Find 
Sacmi RSS Feed
Find out how to subscribe to Sacmi RSS feeds
 
3/19/2003
"Gresestruso rapido" at Vitro (South Africa)

In the Samca Group, the leading South African producer of dry-pressed ceramic tiles and sanitaryware, production of extruded floor tiles has always played a key role. Manufacturing activities at NCI (split tiles) and at Vitro (flat extruded tiles) have now been combined at the new Vitro plant in Vereeniging: old technologies have been abandoned in favour of “gresestruso rapido” (registered Sacmi trademark) manufacturing techniques. Two new production lines were installed in 2001, a further line being added in 2002. All three lines use rapid roller driers, rapid roller kilns and the TEP cutter unit - specially designed by Sacmi for “gresestruso rapido”. Highly significant advantages in terms of automation, low running costs and product quality have been obtained. The end result? A superb vitrified product with excellent mechanical and geometrical characteristics and decidedly competitive production costs. The product: “Gresestruso Rapido” in the standard 300x300x8.5 mm size with glazed and non-glazed porosity of less than 2%. Body colour: red. Other sizes: 240x240 and 400x400mm The production plant: following renovation and expansion, the plant is now made up of: - dry grinding department Utilises a base clay plus two other components and the chamotte. The department has a crusher mill for the chamotte, the main mill being a vertical roller mill. Raw material silos, batching, the discontinuous moisturising and mixing unit and the extrusion department feed line follow. - three production lines, working 24h/day and 7 days/week, made up of: . clay shredder . flat extruder . Sacmi TEP electronic cutting device for “gresestruso rapido” with column-mounted wheel cutters. - green glazing line - Sacmi E4P rapid 4-level roller drier with compenser at infeed. Length 30m, width 2850 mm - dry glazing - kiln infeed compenser - JMS pre-kiln in line with the single-layer Sacmi FMS kiln, total length 110m and width 2500mm - automatic sorting line connected to kiln outlet. The plant consists of two identical lines (kilns with total length of 110 m) and a third line with smaller kiln and drier. Output data for each of the two main lines is as follows: . net kiln output: 7500m2/day . extrusion moisture content: 18-19% . cutter unit output rate: 72 pcs (300x300 mm) per minute (36 cuts, each producing 2 pieces) . 39-minute drying cycle (inlet moisture content 18-19%, outlet moisture content less than 1%) . firing cycle: 38 minutes (pre-kiln included).
Back

Business News

 
1/18/2018
Sacmi DECOCAP 360-3D and ULYSSE win over a can-making multinational
Brand new cap inspection systems developed by the Sacmi Automation & Inspection Systems Division tested successfully at a company’s Spanish plant. The world's first solution for total inspection of decorated twist-off caps.  >>

1/4/2018
Sacmi supplies Catalan Ceramics with the largest press in Vietnam
A South-East Asian player that is already the leader on the local market recently purchased a complete glazed ceramic tile plant from Sacmi.  >>

1/3/2018
Preform inspection systems, leading Spanish company goes for the guarantees provided by Sacmi PVS
After the PVS-2, installed and started up to the customer's enormous satisfaction, the company has now purchased the new Sacmi PVS-3 system, designed for high speed checking of preform lots.  >>

12/20/2017
A breath of fresh air at Ge.Fe. Polymers thanks to Sacmi
Thanks to the “electronic nose” lent to Arpae Imola free of charge, objective readings of the unpleasant smells emitted by the plastic recycling plant have now been taken  >>

 

This website uses "cookies". If you choose to continue using the website, you are authorising the use of cookies according to our cookie policy. For further information or to deny the use of some cookies, please click here.

accept cookie policy