Search
 
Search by year
Search by keyword
Search by sector
Search by category
Find 
Sacmi RSS Feed
Find out how to subscribe to Sacmi RSS feeds
 
12/14/2001
Energy-saving system

Saving with Sacmi kilns: reducing consumption while containing pollution.

Over the last six months increases in fuel costs have weighed heavily on the economic performance of heat treatment machinery. Reducing consumption, however, does not just mean reducing costs: it should also be part of an ongoing environmentally-conscious strategy designed to safeguard resources and abate pollution. In theory this can be achieved by sending less combustion air to the burners and reducing consequent fume weight per unit of product. Yet it a solution that carries risks: 1) “black core” caused by lower oxygen content; 2) altered colour tones where burners are running on reduced air feed and there are firing or product weight flow changes; 3) increased waste if an extensive power output range is no longer available where product feed is discontinuous; Sacmi Forni has been effecting research into these problems for some time now, operating on two different fronts: firstly by modifying combustion systems on existing machines through updating of equipment and, secondly, by installing combustion air recovery and preheat systems on both new and existing machines. Recent modifications made to an existing machine at the Fincuoghi di Bedonia ceramic plant (PR) have resulted in savings in excess of 20% with respect to initial consumption levels – just by updating the combustion system, installing the latest generation of burners in place of existing ones. As far as recovery systems are concerned, Sacmi Forni has developed the new SPR system. The SPR (Super-heated air) system splits the hot air expulsion flues: one expels the last fraction of final cooling air (60-70 °C) which, free from chemical pollutants, can be used to heat the factory (after single-stage filtration where necessary). The other flue expels the last fraction of slow cooling air (140-160°C) which, withdrawn by the combustion air fan and filtered, is sent on to the heat exchanger on the rapid cooling section; modifying the geometry of the exchanger maintains cooling efficiency even though the withdrawn air is already hot; the combustion air arrives at the burners at a temperature of 220-240°C. This system yields further savings of 15% in addition to the savings already provided by the latest generation of burners. The new SPR system will be installed in several ceramic plants in the Sassuolo area such as Panaria, CMV Magica, Novabell, and, outside the area, at Tagina, SCA, ICF and Monoceram.
Back

Technology News

 
4/9/2018
Sacmi, a global partner for sustainable packaging
With the new Sacmi Heroline, manufacturers can make lighter, higher-performing containers while lowering raw material costs, optimising consumption and enhancing logistical efficiency.  >>

3/23/2018
With the Sacmi-Gaiotto GDA80, glazing process excellence is guaranteed
Improved quality and process repeatability plus, above all, maintenance costs reduced by up to 90%.  >>

3/20/2018
Large slab packaging, the Sacmi-made revolution
The only company in the world capable of producing an integrated system for the tray packaging of slabs as large as 1200x2400 mm  >>

3/19/2018
Sacmi high pressure casting, multiple advantages for the sanitaryware industry
Ceramic World Review has published a 'Focus on Sanitaryware' piece investigating the Sacmi approach, which ensures optimal management of all types of sanitaryware, providing outstanding quality, efficiency and energy savings  >>

 

This website uses "cookies". If you choose to continue using the website, you are authorising the use of cookies according to our cookie policy. For further information or to deny the use of some cookies, please click here.

accept cookie policy